 |
 |
|||
 |
||||
 |
Home | ||||||||||
|
Mectron | ||||||||||
|
Light curing units |
||||||||||
|
|||||||||||
|
Jet cleaner polisher |
||||||||||
|
Ultrasonic scalers |
||||||||||
|
Inserts | ||||||||||
|
Piezosurgery | ||||||||||
|
STARLIGHT s
|
|
   |
The STARLIGHT s is an innovative and really interesting product, since it makes use of luminous LEDs instead of the traditional halogen lamps. It uses a high efficiency LED lodged at the top of the handpiece. This innovative solution, as well as determining a considerable reduction of the handpiece size, shows two important advantages: - The lifespan of the light source (of about 1.800.000 cycles - 20 sec.). - The elimination of the need to cool through forced ventilation. The electronics necessary to the working of the Starlight s is integrated inside the handpiece and it allows the application on the dental chair unit with extreme easiness and a unique aesthetic result. The Starlight s' emission of light is much more directed to the composite's absorption spectrum than the one of the halogen lamps. This allows excellent polymerization results with lower power and without heat emission. TECHNICAL CHARACTERISTICS Power supply: 24 Vac +/- 10% - 50/60 Hz Power supply: 33 Vdc +/- 10% Light source: A 5 W high efficiency led with concentrating optical device. Wave lenght: Between 440 - 480 nm Average lifespan: 1.800.000 cycles, 20 seconds each. Exposure time: 20 seconds. Acoustic signal after 10 sec. and at the end of the exposure cycle. Possibility of stopping the cycle at any time. Optical fibre: Ø 8 mm coherent drawn fibres superfused. Sterilizable in autoclave (max.T.135 °C for 20 minutes - max 500 cycles) Dimensions: L. 148 mm Ø 22 mm Weight: 75 gr. Warranty: Tree years on the device except optical fibre. |
 |
|