Home
Mectron
Light curing
units
Jet cleaner
polisher
Ultrasonic
scalers
Compact Piezo
Micropiezo s
Piezoquattro s
Multipiezo
Combi s
Inserts
Piezosurgery
PIEZOQUATTRO s



Piezoquattro s is a modern ultrasonic piezoelectric scaler that exploits the ultrasound technology in dentistry. It is made with the most advanced technologies.

The automatic tuning circuit compensates for the wear of the inserts, achieving the best working conditions and the maximum set power.

TECHNICAL CHARACTERISTICS

Dimensions: 170 x 170 x 80 mm
Working frequency: 24.000-29.500 Hz
Power supply: 230 Vac ± 10% 50/60 Hz - 24W - (optional 115 Vac - 100 Vac)
Water supply pressure: 1-6 bar
Clean function: It enables cleaning cycles to be carried out on the water circuit.
Power: 4 pre-set levels
Water: Allows to work with or without water

Mectron Control Starlight System: Identifies automatically the type of handpiece connected to the cord (scaler or Starlight p led photopolymerizator) and sets up suitable parameters of functioning.
Feedback System: Automatic and instantaneous power control in function of the resistance encountered by the insert
Automatic Protection Control: Interrupts power and water supply in case of incorrect use of the handpiece and insert tip.
Protections & Signals: Check indicating APC (automatic protection circuit) which eliminates all tension on the handpiece and inhibits functioning of the water solenoid valve in the following cases:
- Disconnection of handpiece triggering time APC 20ms
- Electrical damage of the handpiece cord triggering time APC 20ms
- Insert not tightened properly triggering time APC 80ms
Starlight: Signal that a light-curing cycle is in progress

Equipped with:
- New osseonitrated insert tips
- New dynamometric wrench to tighten the insert tips properly.
- Box handpiece for sterilising the handpiece.
- Spare filter for the water circuit and installation accessories.

Warranty: Two years on the device except accessories