From the evolution of the tested ultrasonic scaler Mectron system the new device Micropiezo s comes.

In spite of its small dimensions, Micropiezo s incorporates the new digital electronics equipped with a powerful microprocessor regulating all device's functional parameters:
Mectron Control Starlight System - Feedback System - Automatic Protection Control

TECHNICAL CHARACTERISTICS

Dimensions: 115 x 170 x 70 mm.
Working frequency: 24.000 - 29.500 Hz.
Power supply: 230 Vac +/- 10% 50/60 Hz - 20VA (optional 115 Vac).
Water supply pressure: 1-6 bar with lateral knob. Continuously adjustable.
Water button: Allowing to work with or without water.

Mectron Control Starlight System: Identifies automatically the type of handpiece connected to the cord (scaler or Starlight p led photopolymerizator) and sets up suitable parameters of functioning.
Feedback System: Automatic and instantaneous power control in function of the resistance encountered by the insert
Automatic Protection Control: Interrupts power and water supply in case of incorrect use of the handpiece and insert tip.
Protections & Signals: Check indicating APC (automatic protection circuit) which eliminates all tension on the handpiece and inhibits functioning of the water solenoid valve in the following cases:
- Disconnection of handpiece triggering time APC 20ms
- Electrical damage of the handpiece cord triggering time APC 20ms
- Insert not tightened properly triggering time APC 80ms
Starlight: Signal that a light-curing cycle is in progress

Equipped with new osseonitrated insert tips S1 and S6

Warranty: Two years on the device except accessories